Free shipping over £99| Brand | Topeakmart |
| Material | Alloy Steel, Metal |
| Product Dimensions | 20″D x 21.5″W x 45″H |
| Style | Modern |
| Item Weight | 40.8 Pounds |
Topeakmart 45-70.5in Adjustable Squat Rack Dipping Station Barbell Rack Dip Stand Fitness Bench Press Equipment Home & Gym
£33.29
About this item
- HIGH QUALITY: This barbell rack is made of heavy duty 50mm steel tube frame; Max. Load 550 lb / 250 kg.
- PRACTICAL:Ideal for squats and bench presses – Suitable for use with both standard and Olympic sized bars.
- ANTI-SKID:The barbell bench press stands feet pads equipped with anti-skid to avoid damage to the floor, which also increased the security.
- ADJUSTABLE:The barbell stands have 14 adjustable safety pins on each post to help you adjust to the profit height to meet your need 5cm gaps ; adjustable Height 45-70.5inch / 114-179 cm.
- SAFE & SECURE: For added this adjustable squat rack safety and stability, we use high-quality metal nuts equipped with inner non-slip washers. Please use a wrench to fasten the nuts. Nuts cannot be fully tightened by hand.
Free Shipping on Orders Over a Certain Amount
- 30 days easy returns
- Order yours before 2.30pm for same day dispatch
3 reviews for Topeakmart 45-70.5in Adjustable Squat Rack Dipping Station Barbell Rack Dip Stand Fitness Bench Press Equipment Home & Gym
You must be logged in to post a review.
Related products
Champion Sports Classic Plastic Segmented Beaded Jump Ropes – Phys. Ed, Gym, Fitness and Recreational Use – Multiple Styles
(6) £2.85 – £4.25 Select options This product has multiple variants. The options may be chosen on the product page
You may also like...
Gymreapers Weightlifting Wrist Wraps (IPF Approved) 18″ Professional Quality Wrist Support with Heavy Duty Thumb Loop – Best Wrap for Powerlifting Competition, Strength Training, Bodybuilding
(4) £7.74 – £7.85 Select options This product has multiple variants. The options may be chosen on the product page
Men Sweat Neoprene Weight Loss Sauna Suit Workout Shirt Body Shaper Fitness Jacket Gym Top Clothes Shapewear Long Sleeve
(1) £13.16 – £13.85 Select options This product has multiple variants. The options may be chosen on the product page
Topeakmart 45-70.5in Adjustabl...
£33.29
Lauriane Balistreri –
Needed a simple rack so that I could continue lifting while the gyms were closed due to the rona.I picked up these stands, and I’m happy with them. I have a 5 foot long 1” diameter bar, and it works just fine.Good:They seem surprisingly sturdy and well built. Steel is thick enough, and I don’t have any doubts that it can handle 400lbs. These stands seem like they’re good quality.Good if you don’t have a ton of space. If you lived in an apartment, you could easily stash these away.Bad:Haven’t found a whole lot wrong with these. I’ve been using them over a month now and I’ve never had any problems. But if I have to nitpick:They can be a bit unstable if you use them to bench press. When you’re done with your set and you go to rerack the weight, you can’t slam it back like the bench at the gym. You have to carefully rack the weight, otherwise if you do it to hard, you could literally knock over the stands, and end up in snap city. The more weight you have on the bar, the easier it is to potentially do this. I keep mine against a wall, so worst case they hit the wall.I found that the lowest setting is a little bit to high to be able to bench comfortably, I solved this by putting a few sheets of plywood under my bench to raise the bench up.I also wouldn’t trust the spotter arms for anything other than an emergency bail out. They seem sturdy and well built, but if you were thinking of using the spotter arms to do shrugs or curls, I wouldn’t do that. Keep it for emergencies.Bottom line: this is not fitness club level equipment, but I don’t suspect anyone assumes that. It’s good enough for home use. Also, if you are planning on putting 450lbs+ on this thing, I would look into an actual power rack, I just wouldn’t feel safe using it for much over 400lbs.Oh and make sure you have a set of sockets and a ratchet and an adjustable wrench, if you do buy this. You will need it for assembly.
Eugene Fisher –
I spent a lot of time trying to figure out a which stand to buy before buying this one. I started out years ago with a cap barbell and weights that I just added to as time went by and I’m way too far down stream to switch to regulation weights. These stands work perfectly for the narrower 1 in bar span… and my somewhat confined space. I had to fit them in a room with a large universal machine stationary bike, bench and large stand for free weight. The stands came package very well with a good set of instructions and the material was heaver weight than I expected. They were easy to put together and don’t flinch in use. I’m 6′ 2″ and has all of the adjustment I need. Well worth the money.
Randall Deckow PhD –
Excellent for the price. Saves me a gym membership. I use it for squat, press, and bench press. It’s plenty sturdy, although I’m not loading an insane amount of weight. A couple small issues. First, assembly was a pain because of the nuts they give you that have plastic seals inside. They REALLY don’t want to screw on properly to the bolts. You have to have a lot of patience with them. I ended up assembling them over 3 days because I kept getting frustrated and couldn’t take it any more! Also, assemble this with a partner if you can because it’s hard holding some of the pieces while you screw them together. I had to get down on the floor and use both my hands and feet to hold pieces together while I struggled with 2 wrenches and those annoying nuts. Second, you have to be extra careful when using this for bench press, especially if you’re lifting heavy. Your instinct when re-racking after a set is to slam the bar back into the rack, which catches the bar for you and lets it set back into place. If you try that with these racks, they’ll fall over. You have to carefully re-rack at the end of your set. This ends up becoming another phase of the movememt, so in the back of your mind, you have to reserve some strength for the end of the last rep so you can rack it safely. This only applies to bench press, though. No safety issues with squat or press. Overall, I’m very happy with the purchase.